Bye Bye GX7, helo Up! Plus 2. 再见 GX7, 欢迎 Up！Plus 2.

After some weighing and a sweet deals offer (plus a 3 months installment offer) by my friend. I decided to ditch my original plan to replace my aging GH1. I get myself a 3D printer. And the good parts~ i'm in front of the queue for my friend need me to give him reviews and stress test on the amazing machine.

Yes~! it's ready to print right out from the box~! Just need to download the printing software from the website and you were ready to go. 

Then load the 3D .STL file~ 

Btw, the printer already automatic calibrated it's print bed. So only need to press the print button and select the proper settings for your models. Then hit OK.

And the software will start slicing the models into layers which the printer could work on.

Then it will spool the 'G' code to the printer's buffer memory.

When the printer's extruder is at it's working temperature, the printing will begin. By this time, you were free to disconnect your laptop and let the printer finish it's job.

经过了重重的考虑。以及朋友所给与很好的优惠。（还有3期的分期付款）我决定了放弃了取代我老旧的GH1的计划。把3D打印机抬回家咯～ 而且还可以跳过其他的预购者预先拿到。耶～ 不过需要顺便帮忙朋友做测试。

正如广告中所说的。Up！一开箱就可以打印了。只需要从PP3DP的网站下载打印软件就可以马上开始。把你的模型档案载入，选者合适的设定。按下打印钮，软件就开始切削你所输入的模型。把它转变成打印机能解读的格式， 然后传输至打印机本身的内存，一旦打印机头达到工作温度就会开始打印。这个时候你就可以断开电脑联线了。让打印机独自完成它的工作。